The JBL Link 10 not turning on issue can be caused by several factors. The battery might be dead, there might be a software glitch, or this might be caused by a faulty circuit. To fix this you will need to perform a series of troubleshooting steps on the device.

The JBL Link 10 is a portable Bluetooth speaker that has a Google Assistant feature. It’s best used indoors as it is always ready to help you with its hands free voice control however it can also be used outdoors to play your favorite music. Some of its features include a built-in Chromecast, IPX7 waterproof body, and up to 5 hours of playtime just to name a few.

Technical specifications of JBL Link 10:

  • Transducer: 2 x 45mm
  • Output power: 2 x 8W
  • Frequency response: 65Hz–20kHz
  • Signal-to-noise ratio: >80dB
  • Battery type: Lithium-ion Polymer (3.7V, 4000mAh)
  • Battery charge time: 4 hours @5V 1A
  • Music play time: up to 5 hours (varies by volume level and content)
  • Wireless network: 802.11b/g/n/ac (2.4/5GHz)
  • Bluetooth version: 4.2
  • Supported audio formats: HE-AAC, LC-AAC, MP3, Vorbis, WAV (LPCM), FLAC, Opus 
  • Dimensions (Dia x H): 86mm x 169mm
  • Weight: 710g

What to do when your JBL Link 10 doesn’t turn on

One issue that you might encounter with your Link 10 Bluetooth speaker is when it does not power on. This can be an annoying issue especially if you need to use it. Here are the troubleshooting steps you need to do to fix the problem.

Method 1: Perform a factory reset on JBL Link 10

The first troubleshooting step you should do in this case is a factory reset or hard reset. This is a procedure that will remove the data stored on the Bluetooth speaker and bring it back to its default settings. This is a useful troubleshooting step to do when you are experiencing problems with the device.

Time needed: 2 minutes.

Reset the speaker

  1. Remove the charging cord from the speaker.

    This will ensure that the device will not be charging.JBL Link 10 Not Turning On Problem

  2. Press and hold the Power button and Mute button.

    Do this for around 10-15 seconds until the speaker restarts.What to do when your JBL Link 10 doesn't turn on

The speaker should be in pairing mode right now.

Method 2: Charge the speaker to fix not turning on issue

One factor that can contribute to this problem is a drained battery. If this is the culprit then all you need to do to fix this is to charge the speaker.

  • Insert the micro USB charging cord  into the charging port of the speaker.
  • Insert the other end of the  charging cord to a USB wall charger with an output of at least 1.0A.
  • Connect the wall charger to a power outlet.

Leave this charging for at least 4 hours then check if you can turn on the speaker.

Method 3: Faulty battery

If your speaker has a defective battery then you won’t be able to turn it on. Replacing the battery will fix this however it is recommended that you have this done at a service center.

Some of the causes why a battery will fail is if it is constantly being overcharged or when it is always being exposed to heat. These factors will rapidly degrade the battery performance.

Method 4: Faulty circuit board

Despite having an IPX7 splash proof rating there’s still a chance for water to get inside this speaker. When this happens its components will get water damaged. There’s also the possibility that the charging port of the speaker is damaged. If this is what’s causing the problem then need to have this fixed at a service center.

Having the JBL Link 10 not turning on issue can be a frustrating experience. Hopefully, this solution will help you fix the problem.

Visit our TheDroidGuy Youtube Channel for more troubleshooting videos.

Also Read:



READ SOURCE

LEAVE A REPLY

Please enter your comment!
Please enter your name here